Page Contents
Our top picks: Best American Standard Toilet of 2023
American Standard is a well-known name. They make toilets of every type. Thus, has become a trusted name in every house. They have been designing and making toilets for about 137 years. That is more than a century of making the best-looking toilets.
The Best American Standard Toilet is stylish and increases the beauty of the washroom. These are not just the toilets that are great to look at. Each one of the American Standard toilets has a motto to it. Each design is created, keeping a section of consumers in mind.
They have toilets with the right height, low and high profile, one or two-piece, and much more. And they last like no other. They use unique tech that keeps the toilet as shiny and clean as possible.
Reviewing Best American Standard Toilet
-
American Standard 288DA114.020 288DA.
—
$136.51
$250.00 - American Standard 2889218.020 H2Option — $240.65
-
American Standard 2403128.020 Compact
—
$482.62
$596.00 - American Standard 2961A104SC.020 Colony — $494.88
- American Standard 2988101.020 Cadet 3 — $523.88
- American Standard 2034.314.020, Right — $544.70
A toilet is not a thing that you change often. It is constant. So, as per the claim, American Standard toilets are built to stand the test of time. And it’s true. You can use it for years, and it still will give you a clean, shiny surface. So, what are our top choices, let’s check out right below.
1. American Standard 288DA114.020 288DA
This one is the two-piece H2Optimum toilet with the Siphon bowl jet. It is an ultra-high-efficiency toilet with some vital traits. The Siphon action in the jet bowl pulls the waste from the bowl with ease, keeping the 9″x8″ water spot intact.
The toilet uses the trademark EverClean surface. This patented surface stops bacteria, mold, and mildew from growing. Thus, you get an odor-free, stain-free, shiny toilet.
Now, many consider flushing the toilet after every use of waste of water. But with this toilet, you are getting to save water at a great amount. Its flush rate is 1.1 gallons per flush. And the best part is it matches EPA WaterSense criteria. Which means you are using 20% less water.
Next, you have the PowerWash rim. It is designed in such a way that whenever you are using the flush, you are scrubbing the bowl. That means with each flush you are getting a cleaner toilet. The water pressure through the rim punching scours the toilet like no other.
288DA114.020 288DA fits the small bathrooms pretty well. Not because it is too small in size. It is because of the round front it has. As we said, it is not at all small. It has an elongated bowl, and the rim height is about 16 1/2”.
Features at a glance
- 1.1 gallons flush rate
- WaterSense approved, saves water by 20%
- EverClean surface ensures odor and stains free toilet
- PowerWash rim and Siphon jet bowl scrubs and cleans
- Has a long bowl with a rim height of 16 and a half inch
2. American Standard 2961A104SC.020
So, this is a one-piece American Standard Toilet. There are a few upsides of one-piece toilets. They are easy to install. And no two pieces to join.
Then, there is no space or crevices where the grime and dirt can build up. Cleaning the crevices is tough and no less than a nightmare. As they are tough to clean, they always stay dirty, and you can do nothing about it. So, the one-piece toilet is a better option, at least in this case.
Then you have the 1.28 gallons flush rate. The trip lever is mounted on the side of the flush and has a chrome finish to it.
It follows the WaterSense rules of using 20% less water. Not just that, it meets the ADA and CEC compliance too.
You have a low-profile toilet with the right height. Top that with the slow-close seat and lid. But being the right height doesn’t in any way means that it takes space to install. It is an apt toilet for small bathrooms.
Features at a glance
- Uses 1.28 gallons of water with each flush
- Space saver toilet
- The one-piece design doesn’t let dirt or grime pile-up
- No crevices, easy to clean
- Meets ADA, CEC, and WaterSense rules
- Has the right height with a slow-close seat and lid
3. American Standard 2315.228.020
Let’s talk about a toilet that is apt for kids and people who are small. It is the one when you have kids at your home. If your child cannot sit on the toilet all by themselves, you need to keep a check on them or attend to them. This toilet is great for their potty training. So American Standard keeps their little consumers in mind too.
The rim height of this toilet is 10-1/4” and has a 10-inch roughing-in. So, not only is it apt for people with smaller heights, but also it is easy to install and adjust to the wall. It is the best choice for the school washrooms where most kids use the toilet.
It meets the HET standards. So, no matter what, you are going to use only 1.28 gallons per flush of water in every use.
This toilet, like most of American Standard toilets, has a gravity-fed, pressure-assisted flushing system.
Not just that, it has a siphon jet bowl too. So, you are cleaning the toilet with every flush, and the waste is pulled and drained with ease.
Features at a glance
- 1.28 gallons of water per flush
- Low-profile, 10-1/4” high rim, apt for kids and small person
- Follow HET rules, uses less than 1.6 GPF
- 10″ roughing-in
- Siphon action bowl
4. American Standard 215FC104.020
We have another American Standard toilet with a round front. This one also meets the HET rules of using water no more than 1.28 gallons per flush. So, with this one, you are using 20% less water.
It has the Cadet flushing system too. That means you are cleaning the toilet every time you are pushing the flush button. That calls for less manual cleaning of the toilet. And the person that goes after you will find a clean toilet to use.
To install it, you need a rough-in of 14 inches. And let us mention it loud and clear that a 14” rough-in is not universal, like say a 12-inch. So, this one is an unusual piece but with a smooth flush.
If you do not have space for an unusual 14” rough-in, this is not for your toilet area. Because moving the position of the water supply is not an easy thing to do. So, do proper calculations before buying it.
The toilet has a Vitreous china coating on it. So, it has a beautiful glossy shine to it.
Features at a glance
- The cadet flushing system makes it a complete flush
- Vitreous china coating
- Uses less than 20% water, so WaterSense approved
- Meets HET rule
- Elongated bowl but fits a small space
5. American Standard 2889218.020
This toilet has a chrome-plated top-mounted push button actuator. You will get to know why we are talking about the push right in the beginning within a moment. It is because of its dual flush.
The two sides of the push button allow you to either use the full flush or a partial flush. So when you think you do not need too much water to flush, then just push the button for a partial flush.
So, you already have an ultra HET, and the dual flush takes it to several notches higher in water savings.
If that was not enough, this one offers the cleanest toilet possible. For that, it has the PowerWash rim, EverClean surface, and Siphon jet bowl.
So, with every flush, the water pressure pulls the wastage easily and scrubs and cleans the toilet surface thoroughly. So, there are zero chances of odor, stain, or mildew that results in an unhygienic toilet full of bacteria. To keep your toilet extra clean, you now know what you need.
Features at a glance
- Ultra HET, uses less than 1.28 gallons of water per flush
- Dual flush– full or partial
- EverClean surface, no odor or stain
- Comes with a 12-inch rough-in and a 16-1/2″ rim height
- Trademark PowerWash rim and Siphon jet bowl
6. American Standard 2467016.020
Though this one doesn’t warrant the minimum use of water as the previous ones, still the water usage is not high. It is about 1.6 GPF. The flush rate is still tolerable.
The toilet is pretty high, great for people with regular height, as well as taller heights. So, everyone can sit on it with the utmost comfort and great posture.
It uses the speed connect tank bowl coupling system to make the installation easy. Not just easy, it cuts down the time of installing to a whopping 30%.
To stop the growth of mold and mildew, you have the EverClean surface. So, no bacteria and a healthy toilet area. Then you have the PowerWash rim too. With every flush, you get a cleaner toilet. The water pressure itself scrubs the stain away and gives you a toilet free of odor.
The powerful flush system cleans the dirtiest of toilets with one single flush. So, even if it is repeatedly used due to heavy traffic, it is going to stay clean. It will not need cleaning or plunging with every second use.
Features at a glance
- Uses 1.6 gallons of water per flush
- Siphon jet flushing cleans with a single flush
- The tall height and elongated bowl offer optimum comfort
- Easy to install with speed connect tank-bowl coupling system
- PowerWash rim and EverClean surface
7. American Standard 221CA.004.020
This one is a high commode with a coating of Vitreous china. It is sturdy and holds a glossy finish for a long time. It has aced the combo of form and function.
As usual, it has the PowerWash rim. It is the main tool to keep the toilet clean after every use. The flush and rim combo makes the water flow so strong that it scrubs the toilet clean. So, you are cleaning the toilet after every use. Not with a toilet brush or plunge, though.
The elongated bowl, as well as the 9×8 inches water surface area, helps to keep the toilet clean too. The long bowl ensures comfy sitting as well.
It uses 1.6 gallons of water in every flush. The Siphon action bowl with direct-fed jet and 2-inch flapper flush valve creates the most effective flow of water.
You get a trip lever mounted on one side of the flush. It is the same color and coated as the toilet.
Features at a glance
- 1.6 gallons of water per flush
- Same color trip lever
- PowerWash rim scrubs the toilet with each flush
- 12-inch toilet with a 9”x8” water surface area
- The flush valve and trap-way are both 2-inch and flush strong
8. American Standard 2467.100.020
We haven’t reviewed a toilet with such low consumption of water till now as we are going to get with this toilet. This toilet is the most efficient of them all. It is the optimum water saver.
It uses a 1.1-gallon of water with each flush. And it saves water by a whopping 31%. You are getting a fine balance of high efficiency and ultra-low consumption in a toilet. The one flush with the cadet flow does this magic. So, as we can tell, it pretty much owns the EPA WaterSense criteria.
Then you have the siphon jet flush action where the flush holds water in one section, pointing into the 2-1/8” trap-way. And the moment you flush, the vacuum action creates pressure, and the flow of the water gets the most power. So, it drains the waste with one single flush.
It also has the EverClean surface. This surface means inhibition of odor and stain. So you can keep it clean for a long time even after repeated use. There will be no mold, mildew, or bacteria.
Install the toilet in no time with the help of the speed connect tank/bowl coupling system. You get an elongated bowl, a metal chrome trip lever, and a 10”x12” water surface area.
Features at a glance
- Uses 31% less water in each flush
- 1.1 gallon per flush
- Easy and quick to install with speed connect
- EverClean surface, no odor or stain
- 10×12 inches water surface area and 12-inch rough-in
9. American Standard 2887.216.020 H2 Option
Save water but keep the toilet crystal clean; this is what the motto is of this American Standard toilet. With this, you have two options while flushing the toilet. The reason is its dual flush system. If you need, you can use a full 1. 6 gallons of water with one push of the flush button.
And if you want you can use just 1 gallon of water to clean the toilet. Both amounts of water is going to flush with the same pressure. Using partial flash means you are using 37.5% less water. So, clearly, it wins the WaterSense criteria by miles.
You get the push button actuator mounted on the top of the flush. It is chrome-plated. The toilet also has the PowerWash Rim and EverClean surface. The former with strong water flow scrubs the toilet bowl clean, and the latter helps to inhibit odor and stain.
To drain the wastage with one flush, it uses the jet-powered Siphon. Siphon jet pulls and evacuates the waste like no other.
Installing this two-piece toilet with an elongated bowl is easy and fast, thanks to the speed connect system.
Features at a glance
- Dual flush system
- Partial flush uses 37.5% less water
- EverClean surface and PowerWash rim
- Easy to install with speed connect system
- Drains waste making the toilet super clean with jet-powered Siphon
10. American Standard 2462.016.020
The last one on our list is this toilet with an impressive measurements. It has a width of 20.5 inches and a length of 30.25 inches. In height, it is 29.25 inches. The toilet has a glossy Vitreous china finish. It uses 1.6 gallons of water per flush.
You need a 12” rough-in to install it. Pretty common, so no issue in installing it. The installation turns much easier with the trademark speed connect tank/bowl coupling system. It makes it fast, and your work is done within 30% less time.
To keep the toilet clean, it uses all the typical American Standard toilet qualities. From having an EverClean surface to using the pressure-assisted Siphon jet flush action where the water is held into a pouch and with the push on the trip lever, the vacuum pulls that water with full force.
The bowl shape and size also play a part in keeping it clean. The metal chrome trip lever enhances the beauty of the shiny flush tank.
You have the 2 1/8″ trap-way for flushing the stored water real strong. The water surface area in it is pretty generous too, and it is 10”x 12”.
Features at a glance
- Uses Siphon jet flush action
- Has an elongated bowl
- No odor or stain due to the EverClean surface
- Standard 12 inches rough-in
- Easy and fast to install
Buying Guide for Best American Standard Toilet
The below features are a must in the American Standard Toilets.
Gallon Per Flush
Saving water is the most important thing one can do. When you have a flush tank, many times, you tend to use it every time you use the toilet. It might be about hygiene. But sometimes it’s too much. So, when the toilet itself compels you to use water in the right way, then you know you are investing in something valuable.
So, the toilet must meet the WaterSense criteria. When they approve the brand, you know your flush tank doesn’t have extra water to waste. The best is to use dual flush tanks. If not 1.1, 1.28, or even 1.6 gallons per flush is decent.
Coating
The toilet is not only a thing that you are going to use when needed. A classy-looking toilet can enhance the beauty of the bathroom ten folds. The good news is that all American Standard toilets have a Vitreous china coating on them. The coating is an absolute must for a toilet to have that glossy feel. Otherwise, it is going to look dull and dirty. So, do not miss this feature in any toilet from this brand.
Ability To Cleaning
American Standard toilets have some trademark cleaning tactics. There is the EverClean surface which inhibits odor and stain; thus, mold, mildew, or bacteria don’t build up. Then they have the PowerWash rim, which with each flush, scrubs the toilet thoroughly.
Next is the Siphon jet flush action, and there are more. Even the bowl and water surface area assures a clean toilet. So, make sure you have at least a couple of these features to get a more sanitary toilet after every use.
Rough-In
For setting up the toilet, you need to consider the rough-in. The most common are the 12” ones, and the distinct ones are 10 and 14 inches. Your toilet might have that space or more than that. But if the rough-in doesn’t match, you will have to move the water supply completely. And that is not something you can do easily. So, make sure you buy a toilet only after knowing about the rough-in your washroom needs.
Height
Choose the height of the toilet according to the people that are going to use it. If you have kids in your house or you need toilets in school, then you need to buy one that has a low profile. For people with regular height, the right height ones are pretty standard. Then you have the high-profile ones as well. So, do your own analysis to understand which one you need.
Top-rated American Standard Toilet Comparison Chart
| MODEL | GALLONS PER FLUSH | ADVANCED FEATURES | EASE OF USE |
|---|---|---|---|
| American Standard 288DA114.020 288DA | 1.1 gallons flush rate | WaterSense approved, saves water by 20% EverClean surface ensures odor and stains free toilet Has a long bowl with a rim height of 16 and a half inch | PowerWash rim and Siphon jet bowl scrubs and cleans |
| American Standard 2961A104SC.020 | Uses 1.28 gallons of water with each flush | Space saver toilet The one-piece design doesn’t let dirt or grime to pile-up Meets ADA, CEC and WaterSense rules Has the right height with a slow-close seat and lid | No crevices, easy to clean |
| American Standard 2315.228.020 | 1.28 gallons of water per flush | Low-profile, 10-1/4” high rim, apt for kids and small person Follow HET rules, uses less than 1.6 GPF | 10″ roughing-in Siphon action bowl |
| American Standard 215FC104.020 | Vitreous china coating Uses less than 20% water, so WaterSense approved Meets HET rule Elongated bowl but fits small space | Cadet flushing system makes it a complete flush |
|
| American Standard 2889218.020 | Ultra HET, uses less than 1.28 gallons of water per flush | Dual flush- full or partial, Comes with a 12-inch rough-in and a 16-1/2″ rim height Trademark PowerWash rim and Siphon jet bowl | EverClean surface, no odor or stain |
| American Standard 2467016.020 | Uses 1.6 gallons water per flush | Siphon jet flushing cleans with a single flush PowerWash rim and EverClean surface | Easy to install with speed connect tank-bowl coupling system, Tall height and elongated bowl offer optimum comfort |
| American Standard 221CA.004.020 | 1.6 gallons of water per flush | PowerWash rim scrubs the toilet with each flush 12-inch toilet with a 9”x8” water surface area | Flush valve and trap-way are both 2-inch and flush strong |
| American Standard 2467.100.020 | Uses 31% less water in each flush 1.1 gallon per flush | EverClean surface, no odor or stain 10×12 inches water surface area and 12-inch rough-in | Easy and quick to install with speed connect |
| American Standard 2887.216.020 H2 Option | 1. 6 gallons of water per flush | Dual flush system Partial flush uses 37.5% less water EverClean surface and PowerWash rim Drains waste making the toilet super clean with jet-powered Siphon | Easy to install with speed connect system |
| American Standard 2462.016.020 | 1.6 gallons of water per flush | Uses Siphon jet flush action Has an elongated bowl No odor or stain due to the EverClean surface Standard 12 inches rough-in | Easy and fast to install |
Conclusion
Let’s conclude our detailed review by letting you know that each one of the above toilets is the Best American Standard Toilet. But only if you are buying one with proper research. If you have read the review, you very well understood by now that toilets are no more a bowl and a flush tanks.
There are many more complicated things going on there. So, to get the best out of those impressive technologies, you need to know what type of toilet you need first. You can buy any one of them, and they will last for years.
But if the installation process is not easy or you cannot sit on the toilet comfortably, a sturdy or clean toilet will be a showpiece only. So, make sure you buy the best one that proves to be best for your toilet and daily use.
Leave a Reply