Try to reach down using your hands The first method that you can use is to try to reach the clog using your hands. Of course, you will need waterproof gloves to do this and they should be long enough so as to extend far back on your arm. This should be used if you can be able to spot the object that is causing the clog because the idea here is to remove it completely as … [Read more...]

Shut off the water supply In any toilet repair, the first step is always to turn off the water supply. Locate the shut-off valve at the back of the toilet and turn it clockwise. Clear out water in the toilet tank After the supply has been cut, flush the toilet then open the tank lid and clear out the remaining water using a sponge until the tank is empty. This will ensure … [Read more...]

Turn off the water supply Before commencing on this DIY project, the first thing to do is to shut off the water supply. This will keep you from flooding up your bathroom floor once you dismantle the parts. Simply locate the shut-off valve at the back of the toilet and turn the knob clockwise to cut off the supply. It Might Be Helpful: How To Replace Toilet Flapper … [Read more...]

Shut off the water supply A toilet flapper is located at the bottom of the toilet tank and thus, to reach it, you have to empty the tank. Start by closing off the water supply and this is simply done by turning the shut-off valve at the back of the toilet clockwise. Once closed, flush the toilet to get rid of water in the tank. Hold down the flush handle for about a minute … [Read more...]

Empty the toilet tank The first step to take is to shut off the water supply. Locate the shut-off valve on the wall behind the toilet and turn the knob clockwise. After this, flush the water in the tank and use a sponge to absorb the remaining water while pouring it into the bowl. Next, disconnect the water supply from the toilet tank. Remove the toilet Unscrew the nuts that … [Read more...]